Track Lab Pro Is Live for Red Lab Members

Track Lab went public earlier this month: a free checker that measures your song file right in your browser. This week the members' version, Track Lab Pro, is live for Red Lab members. Before I get to what Pro adds, here's what a track check actually measures, because the free version does most of the teaching and Pro is built on top of it.

What a track check measures

Drop in a WAV, AIFF, FLAC, MP3 or M4A. Track Lab runs eleven checks and gives each one a light (Good, Check or Fix), a number and a next step. It all runs in your browser. Nothing gets uploaded, so your file never leaves your machine.

Here are the eleven, and why each one matters:

  • Format: a lossless file at a normal sample rate and bit depth. A decoded MP3 gets flagged, because the detail it threw away doesn't come back.

  • Clipping: samples stuck at full scale. That's the crunch on the loudest hit.

  • True peak: the highest point between samples. Streaming services convert your WAV to a smaller file, and that conversion can push a peak that sat just under zero over it. I master to about -1.2 dBTP to leave room.

  • Loudness: integrated LUFS, the average level of the whole song. A song much quieter than finished tracks usually hasn't been mastered yet.

  • Loudest moment: the loudest 3 seconds. Your chorus can sit low even when the average looks fine.

  • Dynamics: peak to loudness ratio (PLR), how far the peaks stand above the average.

  • Mono: whether left and right hold together when a phone or a Bluetooth speaker sums them.

  • Low end: rumble under 30 Hz, and whether the bass stays in phase between left and right.

  • High end: whether the highs stop early. That usually comes from the source export, and mastering can't add it back.

  • DC offset: whether the waveform sits centered on zero.

  • Start and end: silence, fades and dropouts at the edges. Six seconds of silence after your song ends plays as six seconds of dead air in a playlist.

Three more readings are there for information only: loudness range, stereo width and tonal balance. They describe your mix, not your master, so they get no light and don't count toward the score. The eleven checks roll up into a readiness score out of 100.

Where the lines come from

The Good, Check and Fix lines aren't numbers I pulled from a forum. I set them from 78 of my own delivered masters and 69 unmastered files, measured with the broadcast loudness standard (BS.1770-4) and 4x oversampled true peak. Every delivered master reads Good on the checks that mastering controls, and the Fix lines are set to catch the problem files in the unmastered group. The two groups are different songs, not before and after pairs, so they show typical numbers for each group. I wrote up the full data in I Measured 147 Songs Before and After Mastering.

What a check can't tell you

Track Lab measures. It doesn't listen. It doesn't judge the music, check rights or AI content, or tell you whether a distributor, streaming service or playlist will accept your track. A clean result means your song passed the measurement checks. Your ears still make the final call.

That's why every screen says the same thing: Step 1 of 2: measurement check. Step 2 is a human listen and master.

What Pro adds for Red Lab members

Pro uses the same checks and the same lines as the free version. What it adds is memory. Instead of scanning a song once and losing the numbers, you can keep working on it across days and see whether each change helped.

  • Saved songs and takes: save a scan under a song name. A new scan of the same song becomes a new take. Only the numbers are saved, never the audio, and they stay in your browser.

  • Take compare: put two to four takes side by side and see what changed, check by check.

  • Album projects: group up to 20 saved songs into an album and see the spread of loudness, true peak, dynamics and tone across the set, with outliers flagged. This is where an EP shows you the one song that sits louder or brighter than the rest.

  • Listening log: log each real listening test for a song: where you listened, what you heard and a note.

  • Backup: export all your saved work to one file and bring it back on another device.

  • Member mastering: when a check points to mastering, Pro shows the member offer: 20% off mastering for life, with your masters back in 2 business days.

How members get it

Pro lives in the Red Lab members area. Your member key sits right above the Pro link, so there's no digging through old emails for it. Paste the key once and Pro stays unlocked in that browser. Pro comes with Red Lab membership and isn't sold on its own.

The free Track Lab is still at jgbeatslab.com/tracklab for everyone.

Not a member yet? Join Red Lab, the JG BeatsLab membership. $97 once, no subscription.

Go deeper: LUFS, True Peak, and What They Actually Tell You

If Track Lab flags loudness, true peak or clipping and your mix won't give you the room, that's what I fix. I master your song in a real DAW session, myself, start to finish.

Book mastering

Human mastering for AI music

Get your song streaming-ready.

$50 a song. Real ears, a real DAW session, and a written Dossier on every decision. Your mix stays your mix.

Book mastering →

Not sure yet? Check your file free in Track Lab.

JG BeatsLab scorecard

Where does your AI music workflow stand? Ten questions, about three minutes. Take the scorecard or get the free guide.

Next
Next

Why AI Releases Get Flagged at Distributor Review, and the Records to Keep